BPM Camera bellows spares - for sale
BPM Bellows Spare : Bellows retaining screwComment: Tiny screw used to attch a set of bellows to a lens or camera mounting panel. There are four on each side. Ideal if you have lost one or want to create a custom double extension system.Condition: Good condition Price: £2 |
 |
BPM Bellows Spare : Bellows centre guide railComment: Thin bar usually found in the centre of Illumitran modified bellowsCondition: Excellent condition Price: £2 |
 |
BPM Bellows Spare : Bellows End bracket screwComment: Screw used to attach the end bracket to one of the two focusing railsCondition: Good condition Price: £2 |
 |
BPM Bellows Spare : Bellows focus locking knobComment: This knob is one provide with the Bowens Illumitran bellows set but can be used to replace damged wheel from a BPM bellows set. It screws on to the focusing knob spindle.Condition: Good condition Price: £3 |
 |
BPM Bellows Spare : Bellows Reprotran film clipComment: One of two clips used to hold slides and negatives onto the perspective plate of the BPM Reprotran.Condition: Very good condition Price: £3 |
 |
BPM Bellows Spare : Bellows focus control spindleComment: The control spindle that is geared and works with the focus rail to adjust the bellows extension and obtain correct focus.Condition: Good condition Price: £4 |
 |
BPM Bellows Spare : Bellows end bracketComment: The end bracket is used to attach a set of bellows to the Bowens Illumitran. They attach to each end of the rails. Normal bellow sets do not have these. You could use these to customise your bellows if you want to secure your set on a wooden or metal base for rigid copy work. They attach to each end of the rails using the small bracket screws sold separately. If you modify a normal set of bellows you'll need longer screws on the fixed panel as this is attached to end of the focus rails at the saCondition: Excellent condition Price: £5 |
 |
BPM Bellows Spare : Bellows focus railComment: The focus rail that runs through the lens and camera mounting panels and provides the system for adjustment. You may be able to add two off these to extend your bellows set if you want to do ultra macro photography, or replace an old damaged rail.Condition: Excellent condition Price: £5 |
 |
BPM Bellows Spare : Bellows mount locking screwComment: One of the most vunberable parts of the bellows assembly is the mount locking screws. There are four of these that poke out at the top of the bellows and they often break leaving the bellow mount stuck in place. If you have bent one it's adviseable to remove it before it snaps off. A replacement is better than needing to buy a new set of bellows.Condition: Good condition Price: £5 |
 |
BPM Bellows Spare : Bellows focus control spindle and lockComment: The control spindle that is geared and works with the focus rail to adjust the bellows extension and obtain correct focus. This one is complete with a focusing lock for the other end.Condition: Good condition Price: £7 |
 |
BPM Bellows Spare : Set of original bellowsComment: Spare set of genuine BPM replacement bellows for the BPM Bellows assembly. If you have an old tatty pair these are easy to replace. All you need is a small jewellers screwdriver. Unscrew four screws at each side to detach the old set from the lens and body panels and screw the new set back in place. I have spare screws if you lose or damage one.Condition: Excellent condition Price: £10 |
 |
BPM Bellows Spare : Bellows lens mounting panelComment: A mounting panel. This is the section that you would normally attach your lens to that slides up and down the rails. But you can replace your camera side with one so you have both panels moving on the focusing rails for total flexibility. Could also be used in a custom double extension project, or just to replace a shabby looking version on your bellows.Condition: Excellent condition Price: £10 |
 |
